Gear Oil

Tarex Logo Final
TAREX GEAR-X5 75W-140 STO 1
Sizes: 1L | 20L | 209L

TAREX GEAR-X5 75W-140 STO 1

FULL SYNTHETIC GEAR OIL / GL-5


Product Description:

TAREX GEAR-X5 75W-140 STO 1 GL-5 Full Synthetic Gear Oil is a synthetic gear oil designed to provide optimum protection under extreme load conditions, whilst maintaining high efficiency; providing excellent load-carrying capability where extreme pressures and shock loading are expected. This product is designed for heavy-duty drivetrains requiring gear lubricants with relatively high viscosity. It is used both on and off track in synchronized and non-synchronized heavy-duty drivetrains and in rear axles. It provides excellent thermal and oxidation stability, extremely low pour point, and low-temperature fluidity. It is specifically designed for transaxles, gearboxes and also limited slip differentials. It does not need an additional friction modifier for use in limited slip differentials as the co-efficient of friction is high enough for non-chatter performance.

Applications:
Heavy duty automotive manual transmissions, axles, and final drives requiring API GL-5 and Scania STO 1:0 level performance. On-highway light and heavy duty trucks, busses and vans including Scania. Off-highway industries including: construction, mining, quarrying, and agriculture. Differentials, final drives, transfer cases and other gear applications where lubricants meeting API service GL-5, multipurpose, or EP gear lubricants are recommended.

Meets the Performances:
API GL-5; LS SCANIA STO 1:0; MACK GO-J PLUS; ARVIN MERITOR 0-76-M; MIL-PRF-2105E/L-2105 D; ZF TE-ML 21B/19C/16F/12B/07A/05A

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals.

BENEFITS:

  • Enhanced EP properties, reduced gear wear and extended life in transmissions, gearboxes, and final drives
  • Extended service with increased efficiency and higher fuel economy
  • Exceptional thermal stability and resistance to high temperature oxidation, long gear and bearing life due to minimal deposits
  • Exceptional shear stability, retains viscosity and film strength under severe operating conditions to prevent wear
  • Outstanding low temperature fluidity versus mineral oils, reduced wear and ease of start-up
  • Compatible with typical automotive seals and gaskets, minimum leakage and reduced contamination
  • Excellent corrosion protection, preventing corrosion for increased equipment life
TAREX Test Method
API GL-5
SAE Grade 75W-140
Density at 15°C gr/cm³ ASTM D 1298 0.87-0.88
Viscosity at 40°C cSt ASTM D 445 185-195
Viscosity at 100°C cSt ASTM D 445 24.5-25.5
Viscosity Index ASTM D 2270 Min. 160
Flash Point °C ASTM D 92 230
Pour Point °C ASTM D 97 -38
Scroll to Top